Some IPTV apps like IPTV Smarters and TiviMate use Xtream-Codes method which you can easily find in your url m3u link the URL server address, a port, a username and a password.

For example, this is a format of url m3u link:

http://your.url.address:NUMBER/get.php?username=YOURUSERNAME&password=PASSWORD&type=m3u_plus&….

So your Xtream-Codes are:

URL: http://your.url.address:NUMBER

USERNAME: YOURUSERNAME

PASSWORD: PASSWORD

* Also you can find your Xtream-Codes in your activation email or use here our automatic converter tools.

De voordelen van Xeev zijn:

1. je kunt helemaal zelf bepalen welke groepen en welke zenders in die groepen je wel/niet wilt zien;
2. Je kunt groepen & zenders hernoemen (al was het maar om een gewenste sortering te forceren);
3. Je kunt zelf nieuwe groepen aanmaken en zenders verplaatsen of kopiëren van de ene naar de andere groep;
4. Je kunt zelf EPG toewijzen (niet 100% maar wel 95% matcht) óf je kunt de EPG van de provider gebruiken. Dit was erg handig bij de huidige storing: hún EPG funktioneerde nl. perfect;
5. Je kunt kiezen voor picons (zender-icoontjes) van de provider, van Xeev zelf óf je kunt zelf een url naar een plaatje opgeven. Dit kun je per zender doen.
6. Je kunt VOD (films & series) laten koppelen aan tMDB, voor omschrijvingen en posters;
7. Je kunt abo’s van meerdere providers combineren tot 1 lijst;
8. Ze hebben een eigen Enigma2-plugin. Hierbij nog een tip: als je ervoor zorgt dat de zenders van je IPTV exact dezelfde naam hebben als die van je satellietkanalen, kun je forceren dat voor IPTV dezelfde picons gebruikt worden als voor de satellietkanalen.
9. Alles blijft automatisch synchroon.

Ga naar de website van XEEV Playlist Editor

Of probeer deze andere free m3u playlist editor (VOD and Series are not supported): http://m3u4u.com

Install the SmartONE IPTV app in your IPTV device and send your url m3u link to the app via this link:

https://smartone-iptv.com/plugin/smart_one/main_generate

Fellow this 5 steps:

Important: Do you have extreme picture problems then open SmartONE IPTV app then go to Settings then SETUP then Application Settings then Playlist Processor and change it form Software to Hardware (or vicevice versa) then close and save and try. See the photo:

Click here if you need more help with instalation or using the app

Volg deze tutorial:

http://netiptv.eu/Tutorial

Hoe IPTV gebruiken met Plex

Met Plex kun je eenvoudig al je favoriete IPTV-kanalen op een centrale plek beheren en streamen. Volg deze stappen om IPTV in Plex in te stellen:

1. Installeer Plex Media Server
   • Download en installeer Plex Media Server op jouw computer of NAS-apparaat. Dit is waar al je media en IPTV-instellingen worden beheerd.
2. Voeg IPTV toe aan Plex
   • Download de IPTV-compatibele plugin voor Plex. Een veelgebruikte plugin is Xteve, die als brug fungeert tussen IPTV en Plex.
   • Installeer de plugin volgens de instructies en zorg ervoor dat de IPTV M3U-link die je van ons hebt ontvangen correct is ingevoerd.
3. Instellingen in Plex
   • Ga in Plex naar de instellingen en navigeer naar ‘Live TV & DVR’. Voeg hier de Xteve-server toe als IPTV-bron.
   • Plex zal nu de kanalen van jouw IPTV-provider laden.
4. Kanalenscan en mappen
   • Laat Plex een scan uitvoeren om alle beschikbare kanalen te detecteren.
   • Na de scan kun je de kanalen rangschikken en categoriseren naar wens, zodat je gemakkelijk toegang hebt tot jouw favoriete content.
5. Klaar om te kijken
   • Je kunt nu alle IPTV-kanalen streamen via Plex, zowel op jouw computer, televisie, als mobiele apparaten met de Plex-app.

Voor eventuele problemen kun je altijd onze FAQ-pagina bezoeken of contact opnemen met de klantenservice.

If it still not working then delete the Smart IPTV app and re-install it.

Install de app in your MacOS via Apple Store. It is trial version and you can buy it from the app or Apple store.

Start the app and fellow this steps:

Install IPTV Smarters app in uw IPTV apparaat en follow all steps:

Open IPTV Smarters app and follow all steps in the photo’s:

STEP 1: Add by Name IPTV4K

STEP 2: Select M3U URL option.

STEP 3: Enter your URL M3U link. We send this URL M3U link to your email  after you buy IPTV subscription from our website.

STEP 4: Click on “Add User” button.

STEP 5: Go to Settings then Stream format and select MPEGTS (.ts) then Save Change

Just for Android App: Go to Settings then Player Selection and select MX Player then Save Change.

Select Install EPG to active it

Tips: Some times you must refrash refresh the channels list 

Enjoy watching!

Deze app is heel goed maar helaas het is niet meer beschikbaar in de app store en gaat de app developer niet meer het updateren. Zie app website voor meer informatie: https://www.duplexplay.com

Go to Google Play store and download Perfect Player IPTV

Please follow all 11 steps 

1 – Open Perfect Player

2 – Go to Settings

3 – Now you are into Settings Page, Go to General

4 – Go to Playlist and enter Your URL (See your email) and add by Name IPTV4k after you done click on OK

Option: If you want add EPG to the channels then go to EPG and add your EPG URL XMLTV link. You can convert your url m3u link to url XMLTV link hier: https://iptv-4k.co/epg/

5 – Go back to your Settings Page and go to Playback

6 – Check ONLY change system volume

7 – Go back to your Settings Page and go to GUI

8– Check ONLY Show channels as group folder

9 – Restart Perfect Player

10 – Now you see channels list on the left side

11 – Press left the button on the remote controller now you have all channels on group folder

12 – Go to any folder and enjoy to watch all channels

IMPORTANT NOTICE:

If working some channels without audio then go to to Decoder and select Hardware. And if all or some of my channels do not play or have playback issues (Android) then select different Decoder type in Settings (Playback->Decoder).
If you see notification message, the app must be restarted to apply changes.

Troubleshooting

If you have any problems viewing the Channels please follow this recommended fix:
Restart the App (PerfectPlayer), and Wi-Fi Router.

Did you ordered the “Adult IPTV package”? Then follow please this steps to add the url m3u link (adult package) in Playlist 2.

1. Full in Playlist 2 your url m3u link of Adult zenders (see your activatie email). Please if you don’t order “IPTV Adult Package” then skip this steps!

2. Press OK to get this menu then select “Kies Playlist”

3. Select both Playlists

4. You will find the adult channels group.

Troubleshooting

If you have any problems viewing the Channels please follow this recommended fix:
Restart the App (PerfectPlayer), and Wi-Fi Router.

IMPORTANT: VLC Player will not working if your channel list is big so please use https://www.smplayer.info or IPTV Smarters Pro

1- Download VLC ( Download URL https://www.videolan.org/vlc/index.html)

2 – Open VLC Player

3- Go to Media -> Open Network stream.

4-  Add your Subscription URL we sent to you and press play

5- Wait till all the Channels load (this may take some time)

Choose a Channel and enjoy the show

1- Go to this website: http://iptvextreme.eu/ and install the app in your device.

2 – Enter The mac address (Open the app in your device to fine your mac address).

3- Enter ‘IPTV4K’ in Playlist Name.

4-  Enter your URL M3U link  in Playlist Link (See you activation email).

5- Click on Save then you must get ‘Playlist saved! Restart the application’ message.

Choose a Channel in the app and enjoy the show.

Tutorial voor SMPlayer (Windows versie)

Stap 1: Download SMPlayer

1. Bezoek de officiële website:
   • Ga naar www.smplayer.info met je webbrowser.
   • Klik op de “Download” knop bovenaan de pagina.
2. Kies de Windows-versie:
   • Er verschijnt een downloadpagina. Kies de Windows-versie van SMPlayer (32-bits of 64-bits afhankelijk van je systeem).
   • Klik op de “Download” knop om het installatiebestand te downloaden.

Stap 2: Installeren van SMPlayer

1. Open het installatiebestand:
   • Zodra het bestand is gedownload, open het installatiebestand door erop te dubbelklikken.
   • Er verschijnt een prompt om de installatie te starten. Klik op “Ja” om verder te gaan.
2. Installatie instellen:
   • Het installatieproces begint. Volg de instructies op het scherm.
   • Je kunt de standaardinstellingen gebruiken door op “Next” te klikken, of je kunt de installatielocatie aanpassen.
   • Klik op “Install” om de installatie te voltooien.
3. Installatie voltooid:
   • Zodra de installatie is voltooid, klik op “Finish”.
   • SMPlayer zal nu op je computer zijn geïnstalleerd.

Stap 3: SMPlayer openen en configureren

1. Open SMPlayer:
   • Dubbelklik op het SMPlayer-icoon op je bureaublad of zoek ernaar in het Startmenu.
2. Configuratie-instellingen aanpassen:
   • Bij de eerste keer openen kun je de taal kiezen. Selecteer je voorkeurstaal en klik op “OK”.
   • SMPlayer wordt nu geopend en is klaar voor gebruik.

Stap 4: Een video afspelen

1. Open een videobestand:
   • Om een video af te spelen, klik op “Bestand” in de menubalk en selecteer “Openen”. Blader naar het bestand dat je wilt afspelen en klik op “Openen”.
2. Ondersteunde formaten:
   • SMPlayer ondersteunt een breed scala aan videoformaten, waaronder MP4, AVI, MKV, en meer. Je kunt vrijwel elk videobestand afspelen zonder extra codecs te installeren.

Stap 5: Ondertitels toevoegen

1. Ondertitels laden:
   • Als je ondertitels aan je video wilt toevoegen, klik op “Ondertitels” in de menubalk en selecteer “Ondertitels laden”. Blader naar het .srt of ander ondertitelbestand en klik op “Openen”.
2. Automatische ondertitels zoeken:
   • SMPlayer kan ook automatisch ondertitels voor je video downloaden. Klik op “Ondertitels” en selecteer “Zoeken op OpenSubtitles.org” om automatisch ondertitels voor je video te vinden en te downloaden.

Stap 6: Sneltoetsen en Geavanceerde instellingen

1. Gebruik sneltoetsen:
   • SMPlayer biedt verschillende sneltoetsen om het afspelen te beheren. Bijvoorbeeld:
     • Spatiebalk: Pauzeren/Hervatten van de video.
     • F: Schakelen naar fullscreen-modus.
     • Pijl omhoog/omlaag: Volume aanpassen.
2. Geavanceerde instellingen:
   • Je kunt de videokwaliteit, filters, en andere afspeelinstellingen aanpassen via het Opties-menu. Hier kun je ook de sneltoetsen aanpassen naar jouw voorkeur.

Stap 7: Updates controleren en SMPlayer bijwerken

1. Controleer op updates:
   • SMPlayer werkt regelmatig zijn functies bij. Om te controleren op updates, ga naar Help in de menubalk en klik op “Controleren op updates”. Volg de instructies om SMPlayer bij te werken naar de nieuwste versie.

How to Setup PVR IPTV Simple Client Kodi Krypton 17

Open Kodi

Go to the top left side / PVR & Live TV settings.

Click on the General tab and right-click on Clear data

Go to the Guide tab and right-click on Clear data to clear-refresh the database.

Select TV

Select Enter add-on browser

Select PVR IPTV Simple Client

Select Configure

Select General

Very important: Turn off ”Cache m3u at local storage”

If you have your subscription m3u URL set Location to Remote Path

Then Select M3U PlayList URL

Enter the URL of your M3U PlayList and select OK

Select OK

Very important: Turn off ”Cache m3u at local storage”

Select Enable

Wait for notification of channels loaded

Now when you go back to the Home Screen and select TV it should look like this

1- Go to your Enigma2 and get your IP address

Go to Settings/Setup/System Network Device Setup Adapter Settings

And get your IP address it starts with 192.168….

2– Go to your windows PC and download here DCC Software

3. Follow this video tutorial: – Note: If you get an error or any problem then delete all IPTV bouquets from the Channel List and I delete the iptv.sh from the box then restart your box –

Wilt u EPG toevoegen voor uw autoscript methode? Dan volg dit stappen (Bedankt voor onze klant Imre!) :

1. Factory reset je openpli (iptv-4k configuratie wissen)
2. Doorloop setup en stop als de wizard wil beginnen
3. Installeer bij extensions Cccam en epgimport
4. Start telnet naar je device
   1. Ga naar de home directory van user root (cd /home/root)
   2. wget https://github.com/su1s/e2m3u2bouquet/releases/download/v0.8.2/enigma2-plugin-extensions-e2m3u2bouquet_0.8.2_all.ipk
   3. wget https://github.com/su1s/e2m3u2bouquet/releases/download/v0.8.2/e2m3u2bouquet_v0.8.2.zip
   4. unzip e2m3u2bouquet_v0.8.2.zip
   5. opkg install enigma2-plugin-extensions-e2m3u2bouquet_0.8.2_all.ipk
   6. opkg install ntpdate
   7. nano /etc/default/ntpdate
   8. Vul in:
      NTPSERVERS=”pool.ntp.org”
      UPDATE_HWCLOCK=”yes”
   9. mkdir -p mkdir /etc/enigma2/e2m3u2bouquet
   10. mv e2m3u2bouquet.py /etc/enigma2/e2m3ubouquet
   11. chmod +x /etc/enigma2/e2m3ubouquet/e2m3ubouquet.py
   12. Reboot het system

5. Vind uw url m3u link in activatie email die hebben al naar uw email gestuurd met autoscript.
6. Genereer epg link van m3u link op pagina: https://iptv-4k.cc/epg/
7. Telnet weer naar het systeem
   1. Type in cd /etc/enigma2/e2m3ubouquet

                                 i.      type in: python e2m3u2bouquet.py -n iptv-4k -m “[JE M3u URL]” -e “[JE EPG URL]” -P -q [PICON PAD] -i -M

                               ii.      de -P en -q /pad/naar/picon zijn nodig als je zender picons wilt zien (dus eigenlijk optioneel)

                            iii.      -i  : benader alle zenders als IPTV

                            iv.      -M : plaatst VOD in aparte bouquets (optioneel)

7. 2. Reboot het systeem weer.
8. Ga op je systeem via de afstandbediening naar menu, plugins, epgimport

8. Kies blauw (sources)

9. Scroll naar beneden, selecteer e2m3ubouquet en activeer iptv-4k

10. Druk op geel (Import current source)

11. Als de initial import meer dan 0 events bedraagd, zijn stappen 1/tm 11 succesvol.

12. Maak het permanent

1. 1. Telnet naar je systeem
   2. nano /usr/bin/enigma2_pre_start.sh
   3. Plak het commando uit stap 7-a-i (python e2m3u2bouquet.py -n iptv-4k -m “[JE M3u URL]” -e “[JE EPG URL]” -P -q [PICON PAD] -i -M) in dit bestand en sluit af

U kunt ook hier extra informatie vinden en plugin update : https://www.suls.co.uk/enigma2-iptv-bouquets-with-epg/

Word er wel EPG getoond maar is paar uur verschoven? Dan volg deze link op het op te lossen. (Bedankt voor onze klant K.):

https://forums.openpli.org/topic/83952-epg-time-2-hours-offset/#entry1359132

berichtje 9 tegen.

_______________________[begin quote]____________________________________________________________

From the files you have send me, I think I know now what is happening.

The utility you are using, is raping our files.

And there is absolutely no need to.

1.  In the /etc/epgimport there should be only 2 files (for the moment.)

The first is the rytec.sources.xml file.

the second is the custom.channels.xml file.

I think the rytec.sources.xml file is present.  If not download it from here:  https://github.com/d…Gimport-Sources

For the second file rename simply the file jmx.IPTV.channels.xml to custom.channels.xml

remove any other file from this folder.  (Of course you can chose to move them to a secure location, if you afraid to delete them)

2. Import the normal Rytec sources.

All your IPTV channels should have the correct EPG

PS:  When using the custom.channels.xml file, EPGimport makes automatically use of it, and links your IPTV channels (generated by jmx) to the EPG.

It is possible jmx has made wrong links, but we will cross that bridge when it happens.

____________________________[einde quote]_______________________________________________________________

Het gaat dus om custom.channels.xml in de /etc/epgimport directory

This plugin support EPG, Fav. list and groups. Please fellow this instruction (you can find also video tutorials in YouTube).

https://www.sat-universe.com/index.php?threads/e%C2%B2-plugin-jedi-maker-xtream.309622/

You can find hier the JEDI MAKER XTREAM (find the last plugin version in last page):

https://www.sat-universe.com/index.php?threads/e%C2%B2-plugin-jedi-maker-xtream.309622/page-5

This plugin support EPG, Fav. list and groups. Please fellow last plugin version and tutorial:

https://www.linuxsat-support.com/thread/147664-x-streamity-xtream-codes-iptv-player-new-thread/?pageNo=1

You can find also video tutorials in YouTube.

Connect MAG DEVICE to TV and Internet. Then do as follows

1. Go to: Settings—> System Settings —> Servers

2. Go to: —>Portals

Set Portal 1: IPTV4K

Set Portal 1 URL: (Check your activation e-mail)

Set Portal 2 Name: Backup

Set Portal 2 URL: (Check your activation e-mail for backup links)

3. Save everything

Reboot device

After the box is restarted, wait until the TV screen shows the channels.

If you get  a message on box “Your STB is Blocked. Call the provider” then please contact us.

This tutorial will guide you through the simple setup instruction for Avov Box/Formuler.
IPTV 4K service uses a free media controlled app called ‘TVOnline’.

TVOnline Setup Instructions:

1. From home screen click ‘Market’.
2. Click ‘TvOnline’ app.
3. Install ‘TVOnline’ app.
4. Wait for the installation to finish.
6. Enter ‘Server name’ (for example ‘IPTV4K’)
and enter ‘Portal link’ (Check your activation e-mail).

7. Click ‘Connect’ to start watching.

Troubleshooting Avov Box/Formuler

If you have any audio problems (no audio) in some channels please follow this link:

https://www.formuler-support.tv/forum/thread/1301-z-series-instructions-z-serie-anleitungen/?postID=8115#post8115

If you have any problems viewing the Channels please follow this recommended fix:
Restart your App, Avov Box/Formuler, and Wi-Fi Router.

Click hier for more official Formuler tutorials

This tutorial will guide you through the simple setup instruction for Avov Box/Formuler.
IPTV 4K service uses a free media controlled app called ‘TVOnline’.

TVOnline Setup Instructions:

1. From home screen click ‘Market’.
2. Click ‘TvOnline’ app.
3. Install ‘TVOnline’ app.
4. Wait for the installation to finish.
6. Enter ‘Server name’ (for example ‘IPTV4K’)
and enter your url m3u link (Check your activation e-mail).

7. Optional: Enter your url EPG link. Go hier and convert your url m3u link to url EPG link: https://iptv-4k.co/epg/

8. Click ‘Connect’ to start watching.

Troubleshooting Avov Box/Formuler

If you have any audio problems (no audio) in some channels please follow this link:

https://www.formuler-support.tv/forum/thread/1301-z-series-instructions-z-serie-anleitungen/?postID=8115#post8115

If you have any problems viewing the Channels please follow this recommended fix:
Restart your App, Avov Box/Formuler, and Wi-Fi Router.

Click here for more official Formuler tutorials

This tutorial will guide you through the simple setup instruction for Formuler 8z box (MyOnlineTV 2 app)
IPTV 4K service uses a free media controlled app called ‘MyOnlineTV 2’.

MyOnlineTV 2 app setup instructions:

1. Turn on your box
2. Start MyOnineTV 2 app

3. Select Add Portal and press OK

4. Enter ‘Portal Nickname’ (for example ‘IPTV4K’) and enter ‘Portal URL link’ (Check your activation e-mail).

5. Go down by using TAB button on your remonte controle or in the screen keyboard (see photo) then select connect and press OK

7.  Start watching.

Troubleshooting Formuler

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Formuler box, and Router (modem).

Click here for more official Formuler tutorials

This tutorial will guide you through the simple setup instruction for Formuler 8z box (MyOnlineTV 2 app)
IPTV 4K service uses a free media controlled app called ‘MyOnlineTV 2’.

MyOnlineTV 2 app setup instructions (URL m3u method)

1. Turn on your box
2. Start MyOnineTV 2 app

3. Select Add Play List and press OK

4. Enter ‘Play List Nickname’ (for example ‘IPTV’) and enter ‘URL m3u link’ (Check your activation e-mail).

5. Optional: Convert your URL m3u link to URL EPG XML link here: https://iptv-4k.co/epg/ and add it in Playlist XML TV EPG URL field.

6. Go down by using TAB button on your remonte controle or in the screen keyboard (see photo) then select connect and press OK

8.  Start watching.

Troubleshooting Formuler

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Formuler box and Router (modem).

Click here for more official Formuler tutorials

This tutorial will guide you through the simple setup instruction for Formuler Z11 box (MyOnlineTV 3 app)
IPTV 4K service uses a free media controlled app called ‘MyOnlineTV 3’.

MyOnlineTV 3 app setup instructions (URL Portal Mac ID Method)

1. Turn on your box and start MyOnineTV 3 app.

2. Fellow here the orginal Formuler video tutorial (Methode 1 Mac ID): Click here to download the tutorial then start it

Please don’t  use the url portal in the video tutorial and use only the url portal that we send it to your email (activation email).

Troubleshooting Formuler

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Formuler box and Router (modem).

Click here for more official Formuler tutorials

This tutorial will guide you through the simple setup instruction for Formuler Z11 box (MyOnlineTV 3 app)
IPTV 4K service uses a free media controlled app called ‘MyOnlineTV 3’.

MyOnlineTV 3 app setup instructions (URL m3u method)

1. Turn on your box and start MyOnineTV 3 app.

2. Select Content Manager

3. Select Content Sources

4. Select Add Play List and press OK

5. Enter ‘Play List Nickname’ (for example ‘IPTV-4K’) and enter your ‘URL m3u link’ (Check your activation e-mail).

5.

Optional: Enter XMLTV EPG URL (Check your activation e-mail or convert your URL m3u link to URL EPG XML link here: https://iptv-4k.co/epg/ and add it in Playlist XML TV EPG URL field.

6.  Select connect and press OK

7. Select: Yes, use portal

8.  Start watching.

Troubleshooting Formuler

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Formuler box and Router (modem).

Click here for more official Formuler tutorials

De Amiko en QSmarter boxen werken perfect met onze IPTV 4K. Volge onderste stappen:

1. Geef je MAC ID door bij het bestellen van je IPTV abonnement. Deze begint met 00:1A:79.

Nadat wij deze hebben geactiveerd, kun je verbinden met de portal om te starten met IPTV.

2. Open de MYTV app

3. Druk Menu > Portal Instelingen

4. Select een portal (meestal Portal1) dan druk Wijzig Portal

5. Vul in Portal naam = IPTV4K (of Portal1 laten staan, heeft geen effect)

6. Invoer onze Portal URL (Zie uw activatie email)

7. User/wachtwoord = LEEG LATEN

8. Sla op door OK te drukken

9. Verbind met portal door het portal te selecteren en OK te drukken in de linkerbalk.

Enjoy!

De BuzzTV boxen werken perfect met onze IPTV 4K. Volge onderste stappen:

In deze guide leert u hoe je een portal kunt toevoegen op BuzzTV XR4000 /XRS4000

U MAC adres dient geactiveerd te zijn alvorens u verbindt met het portal.

1. Ga naar Connections
2. Ga naar Server Settings en voeg een nieuwe server toe
3. Name: naam aanbieder
4. Portal URL: (zie uw activatie email)
5. Connect en enjoy!

This tutorial will guide you through the simple setup instruction for Maxytec RAPTOR Box.

Find the MAC address in the device and setup instructions:

1. Let the STB Boot Up.

2. Goto “My Apps”, The ‘MAC address’ is in the upper right corner.

3. Select  ‘ConfiServer’.

4. Enter your ‘Portal URL’ (Check your activation e-mail)

5. Click on Exit And Save.

6. Restart your ‘Maxytec Box’ and start watching.

Troubleshooting Maxytec RAPTOR Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Maxytec Box and Wi-Fi Router.

This tutorial will guide you through the simple setup instruction for Maxytec INFINITY 4K Box.

Find the MAC address in the device and setup instructions:

1. Let the STB Boot Up.

2. Press Menu then 00 00 00 00 from the remonte controle.

3. You will get this menu. Select MY TV

5. Press again MENU from remonte controle.

6. Select URL 1 en press OK from the remote control.

7. Enter our url portal link (See the activation email) then press OK.

8. Select channel and start watching.

Troubleshooting Maxytec Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Maxytec Box and Wi-Fi Router.

This tutorial will guide you through the simple setup instruction for Maxytec PHOENIX 4K Box.

Find the MAC address in the device and setup instructions:

1. Let the STB Boot Up.

2. Press Menu then 00 00 00 00 from the remonte controle.

3. You will get this menu. Select LIVE TV

5. Press again MENU from remonte controle and select SETTINGS

6. Select Path to portal en press OK from the remote control.

7. Enter our url portal link (See the activation email) then press OK.

8. Select channel and start watching.

Troubleshooting PHOENIX 4K Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Maxytec Box and Wi-Fi Router.

This tutorial will guide you through the simple setup instruction for Cobra V5 Box.

Find the MAC address in the device and setup instructions:

1. Let the STB Boot Up.

2. Press Menu then 00 00 00 00 from the remonte controle.

3. Press here OK on your remote control then immediately press MENU and enter 000000

5. Press again MENU from remonte controle and select SETTINGS

6. Select Path to portal en press OK from the remote control.

7. Enter our url portal link (See the activation email) then press OK.

8. Select channel and start watching.

Troubleshooting Cobra V5 Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Cobra Box and Wi-Fi Router.

This tutorial will guide you through the simple setup instruction for Xsarius Sniper Box.

Find the MAC address in the device and setup instructions:

1. Let the STB Boot Up.

2. Goto “Menu” and select Potrtals. See photo:

3. You can find the ‘MAC address’. See the photo:

4. First select the portal then press on green button in the remont control of the box Enter.Enter PinCode:6969

6. Enter your ‘Portal URL’ (Check your activation e-mail).

5. Click on Exit And Save.

6. Restart your ‘Xsarius Sniper Box’ and start watching.

Troubleshooting Xsarius Sniper Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Xsarius Sniper HD Box and Router.

This tutorial will guide you through the simple setup instruction for Xsarius Sniper Box.

U kan het MAC adres vinden in uw IPTV applicatie of op uw apparaat:

Start u Xsarius STB op en open de IPTV app: Premium TV
Ga naar “Menu” en selecteer Portals
Onderin kun u uw Mac adres vinden – deze geef u door aan ons.
Selecteer vervolgens een portal en druk dan op het groene knopje op uw afstandsbediening.
Vul u verkregen “Portal URL” (zie uw activatie email) in. > Exit and Save.
Herstart je Xsarius Box en begin met kijken!

Troubleshooting Xsarius Sniper Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Xsarius Sniper Box and Router.

This tutorial will guide you through the simple setup instruction for BLOMC, Maxytec i100, Cobra IPTV SMARTBOX Box.

Box Setup Instructions:

• Go to settings.
• IP Settings
• Stalker portal settings
• Press the [ RED ] button then 1212 in the remote control very fast

• Enter your portal URL (Check your activation e-mail)
• Press [FAV] To save
• Exit, and the portal has been saved
• Restart your box and start watching.

Troubleshooting

If you have any problems viewing the Channels please follow this recommended fix:
Restart your BOX and Wi-Fi Router.

This box Support Xtream and Stalker method but with new Firmware Stalker method working not good (LIVE TV give black screen) so please use Xtream method (URL M3U LINK).

This tutorial will guide you through the simple setup instruction for iBravebox M258 Box with Xtream method.

iBravebox M258 Setup Instructions:

• Update your box to the last firmware.
• Go to IPTV.

• Select XTREAM

• Select XTREAM Setting

• Full the server information (Check your activation email)

• After setting the server information, press on the remote control “yellow” key to save.

• Go to XTREAM LIVE and start watching.

Troubleshooting iBravebox M258 Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your iBravebox M258 BOX and Wi-Fi Router.

This box Support Xtream and Stalker method but with new Firmware Stalker method working not good (LIVE TV give black screen) so please use Xtream method (URL M3U LINK).

The tutorial Xtream method coming soon.

This tutorial will guide you through the simple setup instruction for iBravebox M258 Box with Stalker method.

iBravebox M258 Setup Instructions:

• Go to settings.

• Enter your portal Name: IPTV4K
• Enter your portal URL (Check your activation e-mail)

• Exit, and the portal has been saved
• Restart your ‘iBravebox M258’ box’.

• Go to Stalker IPTV and start watching.

Troubleshooting iBravebox M258 Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart your iBravebox M258 BOX and Wi-Fi Router.

This box Support Xtream and Stalker method but with new Firmware Stalker method working not good (LIVE TV give black screen) so please use Xtream method (URL M3U LINK).

This tutorial will guide you through the simple setup instruction for GTMEDIA I-FIRE Box.

GTMEDIA I-FIRE Setup Instructions:

• Go to Account.

• Press GREEN button in the remonte control.

• Enter your URL, Port, User and Password (Check your activation e-mail) and see also the example in the photo.

• Goto Save and press OK in the remonte control.

• Press info in the remonte control.

• Go to LiveTV and start watching.

Troubleshooting GTMEDIA I-FIRE

If you have any problems viewing the Channels please follow this recommended fix:
Restart your GTMEDIA I-FIRE BOX and Router. Connect always your box with cable and direct to main modem.

This box works in the same way as the Mag box (Stalker Portal).

This tutorial will guide you through the simple setup instruction for Octagon Box.

Setup Instructions:

• Go to Network then go to Stalker TV.

• Here you fine the mac adres that you send to us with your order.

• Go to Portal 1 and press the GREEN button in your remonte controle to edit the URL.
• Enter your portal URL (Check your activation e-mail).

• Exit, and the portal has been saved
• Restart your Octagon box and enjoy.

Troubleshooting Octagon Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart yourOctagon BOX and Modem (Router).

This box works in the same way as the Mag box (Stalker Portal).

This video tutorial will guide you through the simple setup instruction for TVIP Box.

How to put several portals in V605:

– system > TV > Content source (In my case Web portal) > Setup Web Portal + OK
– portal manager ON
– use web portal: choose one of the 3
– API mode: (in my case MAG)
– Apply
NOW YOU WENT AUTOMATICALLY TO WATCH TV above “YOU TUBE”: push OK on Watch TV. If all is going well you become a blue screen where you can edit and enter several portals.
If after “apply” nothing happen, return to “use web portal” change to an other possibility and “apply”

Sometimes several trys are needed!

More information: https://forum.tvip.ru/viewtopic.php?f=6&t=1141&hilit=2+portals&sid=b4174cc9bc7b550a52672614abe63a9c

Troubleshooting TVIP Box

If you have any problems viewing the Channels please follow this recommended fix:
Restart yourTVIP Box and modem (Router).

This tutorial will guide you through the simple setup instruction for STB Emulator.
‘STB Emulator’ can emulate the following IPTV set-top boxes.

STB Emulator Setup Instructions:

1. Download ‘STB Emulator’ from the Google Play Store here.
2. Install and Load the ‘STB Emulator’ app and you will see your ‘MAC address’ on screen.
3. Tap near the ‘Top right corner’ and then click ‘Settings’ – the 4th icon from the right.
4. Tap ‘Profiles’.
5. Tap ‘Test portal’ to modify the existing profile or ‘Add profile’ to start a new one.
6. Tap ‘STB Model’.
7. Tap ‘MAG 250’ or whichever STB you wish to emulate.
8. Tap ‘Portal settings’.
9. Enter your ‘Portal URL’ (Check your activation e-mail) and click OK.
10. Now tap ‘Screen Resolution’.
11. Choose ‘1280×720’ (You can choose higher with internet speed 16+ Mbps).
12. Exit the app and restart.
13. You will now see your channel list.

Troubleshooting STB Emulator

If you have any problems viewing the Channels please follow this recommended fix:
Restart your App, Device/Box, and Wi-Fi Router.

This is an application that can replace Set Top Box for our service.
No extra hardware required! All you need is a supported network-enabled Smart TV. You can use the application just like you would the Set Top Box using your TV’s remote.

Download from your’s TV market application named Smart STB

Register on https://smart-stb.net

Use portal: See your email.

Smart-STB application (emulator of “Mag 250” set top box) for Smart TV
Keep in mind, that this application has become paid since 10/30/2016. Price and other information please check on official website: https://smart-stb.net/
To download and install, follow next steps:
1) Enter the app store on your TV.
2) Select the “Search” line and press the input on the remote control.
3) In the search bar, enter “Smart STB” and click “OK”.
4) As a result of the search, select the Smart STB application and press the input on the remote control.
5) The application installation menu opens.
6) When the installation is complete, a message will appear indicating that the installation is complete
Supported systems:
1. Samsung (Tizen) 2. Samsung (Smart TV) 3. LG (Webos) 4. Android (TV, no pen)

Registration on the website of the application developer for access
1) Go to the developer’s site – http://smart-stb.net/
2) Press the register button “Register”.
3) Open the registration form, fill it in and click on the “Register” button.
4) Message will appear on the screen, indicating that an account has been created. You must confirm your e-mail address, specified during registration.
5) Check your email and open an email from Smart-STB.net, then follow the confirmation link according the instructions.

Application activation (purchase)
1) On the http://smart-stb.net/ website, click Sign In to sign in to your account.
2) Enter your email, password and click “Sign in”.
3) On the opened page, click “Get access”.
4) Enter the MAC address of the active connection, address of the portal (See your email), then click the “Order now” button.
Attention! If your TV is connected through a wired (Beter and more stable than WiFi) connection, you enter LAN MAC address. If via Wi-Fi, then the MAC address of Wi-Fi.
The MAC addresses can be checked on TV in the “Settings” / “Network” / “Network status”.
5) Click to shopping cart.
6) In the shopping cart you will see the product that was selected. Click on “Checkout” to proceed.
7) To check the activation, click “Services”.
8) The “Status” column should have status “Active”.

Buy IPTV subscription

You can buy a IPTV subscription from our SHOP

Or you can also 24 hours test it HERE.

Please send us with order the Virtual Mac Address.

What is my Virtual MAC address?

Your Virtual MAC address has the format XX:XX:XX:XX:XX:XX. The Xs can be numbers 0-9 and letters A-F. Example: 00:1A:79:XX:XX:XX.

How to find out my Smart STB’s Virtual MAC address? Click HERE

Launching the application for viewing.
1) Run application.
2) “Loading portal …” appears on the screen. Press the “Menu” or “OK” (“Enter”) button on the remote control.
3) In opened settings menu select “System settings”.
4) In the “System settings” go to “Portal”.
5) In the “Portal” settings, specify the name in the “Portal 1 name” field (for example: IPTV4K) and the portal address in the “Portal 1 URL” field. The address of the portal should be entered (See your email)
6) Exit the “Portal” and select “Restart”.
7) “Loading Portal” and the download bar will appear alternately on the screen.
8) A window for entering login and password will open. Enter your details and click “OK” on the TV screen.
9) The TV viewing menu opens.

Handleiding Prixon P9 – Portal invoeren

Stap 1. Ga naar het beginscherm en klik op Apps Stap  

2. Klik op portal settings. Portal invoeren

Stap 3. Voer de Portal url in (zie je activatie email).